Notes

Slide Show

Outline

1	A step-by-step procedure on how to load and operate the Library Researcher microfilm reader.
2	Turn reader power “ON”. To increase or decrease the brightness of the image screen - press the Lamp (High/Low) switch accordingly.
3	Press the film gate switch (red button) to open the microfilm reader glass flats.
4	Insert the microfilm reel into left shaft, with the start of the reel in an anti-clockwise position.
5	Pass the start of the film reel over guider rollers and through the glass flats.
6	Insert the start of film into slot of the Take-Up reel.
7	With film inserted into slot, rotate the Take-Up reel in a counter-clock-wise position.
8	Use Forward (FWD) and Reverse (REV) buttons to select frame. Note: the film gate will close automatically when film is advanced.
9	The red buttons scroll the film quickly, and the gray buttons scroll the film slowly. You can also adjust the speed of slow scrolling with this red knob. Use the up/down SCAN switch to adjust the frame.
10	Rotate the image accordingly by turning the rotate knob left or right.
11	Enlarge or reduce the image by turning the magnifying lens. Adjust the focus accordingly.
12	When you have finished viewing, press the Reverse (F.REV) button till the microfilm reel has been completely rewound. Put the reel back into the box and return it to the counter for cancellation.